Download SkySweeper Plus 4.13 from Pervisell Ltd

Notes for the small download files

Download all Disks 1 - 7 into a temporary directory (Folder)
Double-click on Disk 1 (SkySwePls.part1.exe) and installation will commence

Only if you suspect a corrupt file, download Disks 7 and 8 (the Parity files); to use these, you need
QuickPar
Download Quickpar - run it and associate PAR2 files (and PAR and SFV if you like) as offered
Now, double click on SkySweStd.par2 and you can check your RAR files.
WinRAR comes from The Home of WinRAR

Download the SkySweeper Standard Plus 4.13 (9,716,643 Bytes) Demo / Update now. Setup will be started by running setup.exe. Please, download also the SkySweeper reference manual (not included in the installation). PLEASE NOTE that this product was discontinued on June 1st 2009. These downloads are only for existing Registered Customers Support and Re-Activations will end on January 1st 2011 but all customers will be advised of how they will be cared for after that time. In the meantime, please read these instructions before making a new Registration Card (regcard.txt). If you want to install the SkySweeper Plus and you already have the previous version installed, the procedure is the same than with the first installation. Do not remove the previous registered SkySweeper version from control panel before installing the new one. SkySweeper Plus only requires a new Activation when first installed; if you update then just copy the file personal.key from the previous installation folder to the latest folder.
Full Installation File
	Reference Manual
SkySweeper Standard Plus - Disk 1 (Disk 1 of 9, 1,457,664 Bytes) SkySweeper StandardPlus - Disk 3 (Disk 3 of 9, 1,457,664 Bytes) SkySweeper Standard Plus - Disk 5 (Disk 5 of 9, 1,457,664 Bytes) SkySweeper Standard Plus - Disk 7 (Disk 7 of 9, 855,110 Bytes) SkySweeper Standard Plus - Parity File (Disk 9 of 9, 1,156,816 Bytes)	SkySweeper Standard Plus - Disk 2 (Disk 2 of 9, 1,457,664 Bytes) SkySweeper Standard Plus - Disk 4 (Disk 4 of 9, 1,457,664 Bytes) SkySweeper Standard Plus - Disk 6 (Disk 6 of 9, 1,457,664 Bytes) SkySweeper Standard Plus - Parity Check File (Disk 8 of 9, 2,344 Bytes)
Notes for the small download files Download all Disks 1 - 7 into a temporary directory (Folder) Double-click on Disk 1 (SkySwePls.part1.exe) and installation will commence Only if you suspect a corrupt file, download Disks 7 and 8 (the Parity files); to use these, you need QuickPar Download Quickpar - run it and associate PAR2 files (and PAR and SFV if you like) as offered Now, double click on SkySweStd.par2 and you can check your RAR files. WinRAR comes from The Home of WinRAR
Release Notes for Version 4.13 Changes in the SkySweeper version 4.13 (released 08.03.2008) compared to the SkySweeper version 4.12. Note - Version 4.13 does not need new activation code if you have registered 4.x standard version. Improvements - New generation MIL-STD-188-141A ALE decoder - Improved STANAG 4285 decoder - Improved MIL-STD-188-110A decoder Bug Fixes - SITOR-A character repetition problem fixed - HFDL position report problem fixed - Several bug fixes to HFFAX